How to install Fontana RV White Travel Exterior Hand-Shower Kit Metallic With Hot & Cold Feature | FS9470
Easy step by steps installation instructions for Sensor Faucet
|
| Visit Product Page  | | - Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the products for any shipping damages. If you find damages, do not install.
- Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
| sensor | 
| |
Hand Held Shower Installations InstructionsSpecifications:
1, designed for use in pressure regulated portable water
System with a maximum operating pressure of 40psi.
2, Maximum flow rate with valves fully open -2.5 gpm.
3, do not let freeze.
4, do not directly connect to a residential high pressure water supply.
Installation Instructions:
1, choose a flat area and have a minimum of 10 ”
Rear clearance for hose and water connections.
2, using the dotted line on this sheet as a template, cut the
Opening for the main body of the shower.
3, connect the female spray hose to the male clamp
Mounting at the back of the shower using Teflon tape.
4, insert the shower and drill the screw holes with a 1/8 ”bit.
5, Caulk the mounting flange with suitable weather resistance,
Flexible sealing material.
6, Drive # 8 flat head screws until secure.
7, Connect the set of faucets to the on-board water system.
8, Attach the hose and the shower head.
Fontana Atlanta Showers RV Exterior Shower Box KitThis sprayer has an ultra-tight seal. the outside spray box features an easy-to-open door for fast external access. This kit has been designed for a fast no-hassle connection between the sprayer hose and water supply. The spray box mounts flush to stay unassuming on your vehicle and has 2 simple turn knobs for temperature management. This sprayer and the matching hose are made with premium-grade light-weight artificial resins, and spray box is created with industrial-grade ABS for unique sturdiness and a period of use. Features:
| Visit Product Page | - Brand Name: FontanaShowers
- Model Number: FS9604
- Length: 10.55 inches (26.8cm)
- Width: 5.9 inches (15cm)
- Control Type: Cold and hot
- Material Type: ABS
- Item Diameter: 10.55 inches (26.8cm)
- Item Height: 4.13 inches (10.5cm)
- Installation Type: Wall Mounted
- Bracket Type: Hot and Cold
- Stent Type: Fixed stent
- Size of Hole: 9.06X4.41 inches (230X112mm)
- Dimensions: 10.55X5.9X4.13 inches (268X150X105mm)
- Usage: Beach, RV, Outside Pool or anywhere
- Color: white
| |
|
|
Fontana Atlanta RV Shower Installation
Plan the Exterior Shower Box Installation
Coordinate the wall opening, mounting flange, hot and cold supplies, exterior sealing and winterization access.
Installation Hub
Exterior Installation
Wall Opening
Water Connections
Maintenance
Documentation
RV Exterior Shower Installation Questions
How should the wall opening be sized?
Use the actual shower-box dimensions and supplied template. Check the wall cavity for wiring, framing and other services before cutting.
Open RV Shower Guide
How should the exterior flange be sealed?
Use a compatible exterior-grade sealing method around the mounting flange while preserving drainage paths and following the vehicle or enclosure manufacturer’s requirements.
Review Outdoor Installation
When should the water connections be tested?
Test the hot and cold connections before final fastening and again after installation. Confirm that hoses cannot kink or rub against sharp surfaces.
Review Connection Guidance
Does the exterior shower require winterization?
In freezing climates, follow the vehicle plumbing system’s winterization procedure and ensure water is drained from the shower box, hose and connected lines.
View Maintenance Resources
|
|
|
